Moomba Craz User Manual

45
© 2016 Skier’s Choice, Inc.
DIgITal CRUIse PRo II
Parameters
The following are the parameters that can be displayed in
standard or metric units.
• RPMs/MPH
• Ballast / Wakeplate Settings
• Boat Speed
• Water Temperature
• User Settings
• Engine Hours
• Cruise On/O
• Paddlewheel Oset
• Cruise Set Speed
• Active Fault Codes
• Stored Fault Codes
Navigation and Keypad Functions
The keys on the keypad are as follows:
First Time Startup
When power is applied to the 2015 Digital Cruise Pro II, the
Warning and Shutdown lights illuminate and the Moomba
logo displays.
Once the engine has
started, the Main Page
view appears with Water
Temperature, Speed,
ZeroOTM Cruise status
and Engine Hours.
While on this screen,
press the Soft Key 1 and
the top of the screen will
read “Cruise On”. This will
activate the down (Soft
Key 2) and up (Soft Key
4) arrows to adjust the
Cruise Set Speed.
NOTES:

Moomba Craz Specifications

General

Ballast Capacity	3, 700 lbs
Beam	102 inches
Engine	Indmar Raptor 400
Engine Options	Indmar Raptor 400, Indmar Raptor 450
Length	22 ft