MOON Stellar DVD Player
Installation Tips
The MOON Stellar DVD player should be placed on a rigid surface to prevent any accidents such as
falling over. It is highly recommended that it sits on its own dedicated shelf.
You should never place another component on top of this DVD player. As well, you should avoid
placing it near a heat source or inside a closed cabinet that is not well ventilated. This could
compromise the DVD Player’s performance and reliability.
Once you have decided on a location for your Stellar, you should install the four (4) pointed screw-on
tips onto the cones located on the bottom of the chassis. These tips will easily scratch most surfaces,
therefore it’s advisable to follow these instructions:
1) Place your Stellar on a soft surface (i.e. carpet) and carefully turn it so that it rests on its side.
2) Screw one tip onto each of the four cones.
3) Carefully move your Stellar to it’s pre-determined location.
Included with these tips is a small metal rod, intended for final adjustments (if necessary) by simply
threading it through the tiny hole of each of these tips and then gently turning. These adjustable
screw-on tips serve two purposes: Mechanical grounding of the chassis and compensation for surfaces
that aren’t perfectly level.
Since household dust is an excellent insulator of heat, we suggest that you clean both of the curved
side-mounted heat sinks on a regular basis. A smooth nylon brush with long bristles (ie. paint brush) is
recommended for this task.
Finally, you should make all of your audio and video signal connections prior to making the AC
connection between the Stellar and the AC wall outlet.
____________________________________________________________________________________
Installation Tips 6
To Next Page
Loading...
