Moons' SSDC-R Series User Manual

13
Rev. 1.0
10/22/2018
SSDC-R/C Hardware Manual
400-820-9661
2.4 Choosing the Right COM Port
Open the
“
Device Manager
”
on the PC. There may or may not be a
“
Ports
”
selection.
Connect the mini USB cable to the PC. The connected COM port should then be displayed.
Choose this new COM(n) port in the Step-Servo Quick Tuner software.

Moons' SSDC-R Series Specifications

General

Brand	Moons'
Model	SSDC-R Series
Category	Servo Drives
Language	English