11
3. INSTALLATION AND CONNECTION
3.1. Transportation
1. When storing or moving the heat pump, the heat pump should be in the upright position.
2.When moving the heat pump, do not lift the water union since the titanium heat exchanger
inside the heat pump will be damaged.
3.2. Notice Before Installation
1.The inlet and outlet water unions may crack if using soft pipes. If so, they should be directed
down to alleviate the weight of the water and pipes on the connectors. We recommend the use
of hard pipes.
2.To guarantee the heating efficiency, the water pipe length should be ≤10m between the pool
and the heat pump.
WARNING: The heat pump must be installed by a professional and connected
by a certified electrician. Otherwise, the heat pump might be damaged and risky
for users safety.
This section is provided for information purposes only and must be checked and
adapted if necessary according to the actual installation conditions.
To Next Page
Loading...