40
No Measurement Available
If the above icon is displayed, either one or more
of the conditions listed above are not met, or
there is a problem with obtaining a measurement.
Oil Level Measurement
With the Oil Level Menu selected, HOLD the right
stalk button to summon a new measurement. An
hour glass icon appears while a measurement is
active and the engine revs will increase. Do not
operated the vehicle during this time.
DRIVER INFORMATION PANEL
Engine Oil Level
PRESS the right stalk button to cycle through to the
Engine Oil Level. The reading displayed defaults to
the last measurement.
Oil Level
It is recommended that an oil level check is carried out periodically.
To activate an oil level measurement, the vehicle should be:
1. Parked stationary on a level surface.
2. Park or Neutral gear selected and handbrake on.
3. The engine on and running at normal operating temperature.
It may take approximately 2 minutes to complete a measurement. During
this time, the engine may run at higher revolutions that normal. Do not press
pedals or leave the vehicle unattended whilst the measurement is active.
Engine oil level measurement is not available whilst the vehicle is in motion.