Morgana DigiFold Pro - Using the Correct Blade Set

TroubleShooting
UsingtheCorrectBladeSet.
TwoBladesetsaresuppliedwiththemachine.
TheStandardBladesetissuitableformaterialthicknessesof0.25mm(0.010”)and
greater.
TheNarrowBladesetissuitableformaterialthicknessesof0.25mm(0.010”)and
smaller.
IftheStandardBladeSetisusedtocreaseandfoldmaterialslessthan0.25mm
(0.010”)inaccurateresultscanbeproduced.
IftheNarrowBladeSetisusedtocreaseandfoldmaterialsgreaterthan0.25mm
(0.010”)crackingcanoccur.Moreimportantlythiscouldcausethemainmotorto
temporarilystall.Thisprobablywon’tbethatnoticeableuntilyoulookattheresults,
wherebythecreasepositionwillvary.
Page49SYSTEM
DigiFoldPro