Morris C2 Contour - Maintenance; Storage

Safety
1-6 August 2014 C2 Contour Air Drill
Caution
Care should be taken when
working near the Air Cart
while the fan is running.
Product blowing out of
the system could cause
personal injury.
Caution
Keep service area
clean and dry. Wet
or oily floors are
slippery. Wet spots
can be dangerous
when working with
electrical equipment.
Maintenance
• Shut tractor engine off before making any
adjustments or lubricating the machine.
• Block machine securely to prevent any movement
during servicing.
• Wear close tting clothing and appropriate personal
protective equipment for the job.
• Always wear safety goggles, breathing apparatus
and gloves when working on seeder lled with granular
chemical or treated seed per the manufacture’s
instructions.
• Do not modify the machine.
Storage
• Store implement away from areas of main activity.
• Level implement and block up securely to relieve
pressure on jack.
• Do not allow children to play on or around stored
implement.