Operation
C2 Contour Air Drill August 2014 5-13
Important
Pneumatic Tires Only.
Keep opener tires air pressure at the listed
specifications to achieve and maintain proper
seed depth.
Depth Adjustment - Continued
• Remove lynch pin from 1/2” diameter depth pin.
• Remove depth pin.
• Rotate depth cam to desired lettered setting (“A” is
the shallowest postition). Each increment changes
the depth a 1/4” (6.4 mm).
• Reinstall 1/2” pin and lynch pin noting letter position
before adjusting other openers.
Note: For ease of adjustment, adjust a few openers
across the drill to conrm desired seeding
depth before adjusting the remaining
openers.
• Move the “Openers” ball valve to the unlocked
position before using drill.
ADJUSTMENT CAM
Adjustment Cam
LYNCH PIN
To Next Page
Loading...