GENERAL TECHNICAL INFORMATION
2 - 30
Griso V1100
• Insert the pin.
• Fit the split pin.
• Push the rear brake lever until the pistons are against
the new pads.
• Check the brake fluid level.
• Fit the calliper to the disc and tighten the two screws.
• Fit new ties and secure the oil line and the speed
sensor cable to the frame.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
To Next Page
