MOTO GUZZI GRISO - Generator Belt Tensioning

GENERAL TECHNICAL INFORMATION
2 - 31
Griso V1100
2.2.8 GENERATOR BELT TENSIONING
• Working on either side, loosen and remove the three
screws securing the side body panels.
• Working on the right side, loosen and remove the two
nuts securing the exhaust manifold, collect two
washers per nut.
• Loosen the manifold clamp.
• Remove the right exhaust manifold.
• Loosen and remove the two screws securing the
control unit protection.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten