02_67
Start-up Button (02_67)
•
Press the button and the starter motor spins the engine.
•
After starting the engine, hold down (3 seconds) to activate/deactivate the
MGCT control system. By pressing and quickly releasing, you can change
the MGCT control level.
NOTE
TO REPEAT THE ACTIVATION/DEACTIVATION OF MGCT CONTROL SYSTEM,
WAIT TWO SECONDS AND PRESS THE STARTER BUTTON AGAIN
02_68
Engine Stop Switch (02_68)
It acts as a safety or emergency switch.
With the switch set to KEY ON the engine can be started; by switching it to the KEY
OFF position, the engine stops.
IMPORTANT
DO NOT OPERATE THE ENGINE STOP SWITCH WHILE RIDING THE VEHICLE.
IMPORTANT
WITH ENGINE OFF AND THE IGNITION SWITCH SET TO «ON» THE BATTERY
MAY GET DISCHARGED.
WHEN THE VEHICLE IS STOPPED AND AFTER THE ENGINE HAS BEEN
TURNED OFF TURN THE IGNITION SWITCH TO «OFF».
74
To Next Page
Loading...
