Remove any possible strange
body that might be stuck in the
tread design.
Brake levers Check they function smoothly.
Lubricate the joints and adjust the
travel if necessary.
Clutch lever Check correct operation and empty
travel. Check the condition of the
cable on the handlebar and on the
engine. The cable must be
replaced if it shows any signs of
fraying. Lubricate the joints if
necessary.
Steering Check that the rotation is uniform,
smooth and there are no signs of
clearance or slackness.
Side stand Check that it slides smoothly and
that it snaps back to its rest position
upon spring tension. Lubricate
couplings and joints if necessary.
Clamping elements Check that the clamping elements
are not loose.
Adjust or tighten them as required.
Fuel tank Check level and refill if necessary.
Check the circuit for leaks or
obstructions.
Check that the tank cap closes
correctly.
90
To Next Page
Loading...
