Safety and General Information
12
Single-Unit Charger
Batteries
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate the charger if it has received a sharp blow, or has been dropped
or damaged in any way.
3. Do not disassemble the charger if it has received a sharp blow, or has been
dropped or damaged in any way.
4. Never alter the AC cord or plug provided with the unit. If plug will not fit the
outlet, have proper outlet installed by a qualified electrician. An improper
condition can result in a risk of electric shock.
5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when
disconnecting charger from AC receptacle.
6. To reduce the risk of electric shock, unplug the charger from the outlet before
attempting any maintenance or cleaning.
Kit Number Description
NTN9393 110V - NiMH Charging Adapter
Kit Number
Capacity in milliampere-
hour mAH
Description Composition
NTN9395 550 mAH T6000-Series NiMH
2 T6200 body.fm Page 12 Tuesday, February 20, 2001 3:36 PM
To Next Page
Loading...
Need help?
General
