Disassembly/Reassembly Procedures: Required Tools and Supplies 7-3
7.2 Required Tools and Supplies
7.3 Fastener Torque Chart
Table 7-3 lists the various fasteners by part number and description, followed by the torque values
and the location where used. Torque all fasteners to the recommended value when assembling the
radio.
Table 7-2. Required Tools and Supplies
Tools
Motorola
Part Number
Supplier
Supplier
Part Number
Remarks
Chassis Opener 66012028001 Motorola – To remove chassis from housing.
Bit, Torx T6 – – – For back kit (chassis) and keypad retainer.
Driver, Torque – – – –
Black stick – Hexacon
Electric Co.
MA-800G For keypad rubber mushroom rib assembly
and disassembly.
Round stick – Brusia BE-MO-14383 For microphone membrane assembly.
Allen wrench – – – To loosen accessory-connector cover thumb
screw (if thumb screw is too tight).
Table 7-3. Fastener Torque Chart
Motorola
Part Number
Description Repair Torque (in-lbs)
0386104Z04 Speaker retainer and Chassis screw 3.0
0378212A02 Keypad Retainer screw 1.2
02012016001 Rotary Switch Spanner nut 4.5
To Next Page
Loading...
