Radio displays available network selection and the network signal strength.
If the radio displays No network available, press the Menu Select button directly below
Rfsh to search for available networks.
4 Press
or to scroll through the list and press Menu Select button directly below Sel to
connect to the selected network.
Radio displays the WiFi status, the selected network, and the signal strength.
NOTICE: The List and Rfsh buttons are not available when WiFi is searching or connecting to
network.
6.23.3
Checking the Wi-Fi Configuration and Status of the Radio
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Wi-Fi button.
• or to WiFi and press the Menu Select button directly below WiFi.
The display shows the current status of the Wi-Fi as described next.
Searching
Looking for available Wi-Fi networks that have been preprogrammed into the radio.
Connecting
In the process of connecting to a found Wi-Fi network.
Connected
Connected to one of the preprogrammed Wi-Fi networks.
No Service
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator, on the front
display.In addition, the WiFi menu shows Connected under the connection Status heading,
what network you are connected to under the Network heading, and the signal strength to that
network under the Sig Strength heading.
2 Press
to exit.
6.24
Utilities
This chapter explains the operations of the utility functions available in your radio.
6.24.1
Viewing Recent Calls
When and where to use: This feature allows you to view the recent incoming and outgoing call
information of the following call types:
• Call Alert
• Selective Call
• Private Call
MN004476A01-AE
Chapter 6: Advanced Features
115
To Next Page
Loading...
