b. Short press the preprogrammed Record Playback button again to skip to the next saved
call. If there is only a single saved call, the playback skips to the end of the call.
Radio auto playback the most recent incoming call followed by saved calls in chronological
order.
Radio displays the playback status.
NOTICE:
Received call overwrites the ongoing record playback. User can short press the
programmable button within three seconds to continue the playback and ignore the
receiving call.
User can short press the programmable button to trigger playback when the radio is
receiving call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check
with your dealer or system administrator for more information.
6.24.20
General Radio Information
Use this menu item to view the general information of your radio.
The available information are:
• Radio Information
• IP Display
• Control Assignments
• Soft ID (if enabled)
6.24.20.1
Accessing the Radio Information
When and where to use: This feature displays the following radio information:
• Host Version
• Secure Version
• Model Number
• ESN
• Flash Code
• Tuning Version
• Bluetooth Address
• Expansion Board Type
• DSP Version
• KG (Secure Algorithm)
• Serial Number
• Flash Size and Type
• RF Band(s)
• Processor Version
• Language Pack ID and Version (only when the language of the display is set to non-English)
MN004476A01-AE
Chapter 6: Advanced Features
126
To Next Page
Loading...
