EasyManua.ls Logo

Motorola APX 8000H - Selecting Secure Transmissions; Selecting Clear Transmissions; Managing Encryption; Loading Encryption Keys

Motorola APX 8000H
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.14.1
Selecting Secure Transmissions
Procedure:
Turn the preprogrammed Secure/Clear switch to the secure position.
If the selected channel is preprogrammed for clear-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows Clear TX only.
The radio does not transmit until you set the Secure/Clear switch to the clear position.
If the “Ignore Secure/Clear Switch when Strapped” programming option is enabled, the radio
transmits without displaying any messages in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio
technician.
The Secure/Clear switch only applies when the radio is transmitting.
6.14.2
Selecting Clear Transmissions
Procedure:
Turn the preprogrammed Secure/Clear switch to the clear position.
If the selected channel is preprogrammed for secure-only operation, when you press the PTT
button, you hear an invalid mode tone and the display shows Secure TX only.
The radio does not transmit until you set the Secure/ Clear switch to the secure position.
You can request to configure the radio to ignore the clear voice or insecured transmission
when the radio is in secured transmission. Check with your agent for details.
If the “Ignore Secure/Clear Switch when Strapped” programming option is enabled, the radio
transmits without displaying any messages in the strapped mode of operation, regardless of
the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio
technician.
The Secure/Clear switch only applies when the radio is transmitting.
6.14.3
Managing Encryption
This chapter explains the encryption feature on your radio.
6.14.3.1
Loading Encryption Keys
Prerequisites:
Refer to the Key Variable Loader (KVL) manual for equipment connections and setup.
Procedure:
1 Attach the KVL to your radio.
The display shows Keyloading and all other radio functions, except for power down, backlight,
and volume, are locked out.
MN004476A01-AE
Chapter 6: Advanced Features
85

Table of Contents

Related product manuals