4 Push at the bottom of the radio until the radio is released from it.
2.6
Turning On the Radio
Procedure:
1 Rotate the On/Off/Volume Control Knob clockwise until you hear a click.
• If the power-up test is successful, you see a splash screen on the radio display, followed by
the Home screen and the Codeplug Alias.
• If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric
code).
NOTICE:
If the radio fails to power-up after repeating a few times, record the Error XX/YY code
and contact your dealer.
Codeplug Alias feature is enabled through Customer Programming Software (CPS)
configuration to display the codeplug alias as a temporary text during power on.
2 To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a
click.
MN004476A01-AE
Chapter 2: Preparing Your Radio for Use
21
To Next Page
Loading...
