You Hear Tone Name Heard
A Group of
Low-Pitch-
ed Tones
Busy When system is busy.
Short, Me-
dium-Pitch-
ed Tone
Valid Key-Press When a correct key is pressed.
Radio Self Test Pass When radio passes its power-up self test.
Clear Voice At beginning of a non-coded communication.
Priority Channel Re-
ceived
When activity on a priority channel is received.
Emergency Alarm/Call
Entry
When entering the emergency state.
Central Echo When central controller has received a request from a
radio.
Long, Medi-
um-Pitched
Tone
Volume Set When volume is changed on a quiet channel.
Emergency Exit When exiting the emergency state.
A Group of
Medium-
Pitched
Tones
Failsoft When the trunking system fails.
Automatic Call Back When voice channel is available from previous request.
Keyfail When encryption key has been lost.
Console Acknowledge When status, emergency alarm, or reprogram request
ACK is received.
Received Individual
Call
When Call Alert or Private Call is received.
Call Alert Sent When Call Alert is received by the target radio.
Site Trunking When a SmartZone trunking system fails.
Two Short,
Medium-
Pitched
Tones
Over-the-Air Program-
ming request
When the radio receives an over-the-air programming
request.
Short, High-
Pitched
Tone
(Chirp)
Low-Battery Chirp When battery is below preset threshold value.
Two High-
Pitched
Tones
GPS Fails When the GPS fails or loses signal.
Ringing Fast Ringing When system is searching for target of Private Call.
Enhanced Call Sent When waiting for target of Private Call to answer the
call.
Phone Call Received When a land-to-mobile phone call is received.
Gurgle Dynamic Regrouping (When PTT button is pressed) a dynamic ID has been
received.
Talk Permit (When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
MN004476A01-AE
Chapter 4: Status Indicators
39
To Next Page
Loading...
