3.11
Adjusting the Volume
Procedure:
To adjust the volume of your radio, perform one of the following actions:
● To increase the volume, turn the On/Off/Volume Control knob clockwise.
● To decrease the volume, turn the On/Off/Volume Control knob counterclockwise.
3.12
Setting Squelch Levels
Procedure:
Press the programmed Squelch button.
Result:
NOTE:
The default setting is Normal.
The squelch feature is supported in analog mode only.
● If your radio is set to tight squelch, an ascending indicator tone sounds.
● If your radio is set to normal squelch, a flat indicator tone sounds.
● If your radio is set to loose squelch, a descending indicator tone sounds.
MN010576A01-AA
Chapter 3: Getting Started
19
To Next Page
Loading...
