Chapter 17
Lone Worker
This feature prompts an emergency if there is no user activity (button press or channel selector activation) for
a predefined time.
Procedure:
Press the programmed Lone Worker button.
When there is no user activity, the radio prewarns you once the inactivity reminder timer expires. You can
reset the timer by pressing the PTT button or rotating the channel selector.
If there is still no response from you and the predefined inactivity timer expires, the radio initiates an
emergency alarm as programmed by the dealer.
NOTE: This feature is supported in digital mode only.
MN010576A01-AA
Chapter 17: Lone Worker
35
To Next Page
Loading...
