Chapter 6
Time-Out Timer
Your system administrator can set the time-out time for a channel through the Customer Programming
Software (CPS).
Before the preset timeout timer of the radio expires, a warning tone is emitted based on the preset timeout
warning timer time.
When your radio reaches the time-out time, your radio stops transmitting, and the following radio indications
occur:
● A continuous alert tone sounds.
● The red LED extinguishes.
To resume transmission, you must release the PTT button and wait for the penalty timer to expire.
MN010576A01-AA
Chapter 6: Time-Out Timer
23
To Next Page
Loading...
