Chapter 11
Talkaround
This feature allows you to continue communicating when your repeater is non-operational, or when your radio
is out of range from the repeater but within the talk range of other radios.
11.1
Toggling Between Repeater and Talkaround Modes
Procedure:
Press the programmed Repeater/Talkaround button.
When the radio Talkaround mode is off and within the range of the radio, there is no need to connect a
repeater to convert the receiving parameters into the transmitting parameters during transmission.
NOTE: Check the channel to enable the Talkaround feature.
Result:
● If a high-pitched ringtone sounds, your radio is in talkaround mode.
● If a medium-pitched ringtone sounds, your radio is in repeater mode. Ensure that the radio is within the
repeater range to operate in the repeater mode.
MN010576A01-AA
Chapter 11: Talkaround
28
To Next Page
Loading...
