DEC 2010
- Press the WPS button on the back of the CPEi 885.
- Press the WPS button on the client device.
- The connection will be automatically established.
• Software button PBC on the CPEi 885
- Navigate to the Security page of the Wi-Fi section of the CPEi 885 GUI as
detailed above.
- Select “PBC” at the WPS Method dialog box and select “Apply”.
- Press the WPS button on the client device.
- The connection will be automatically established.
Option #2, Personal Identification Number (PIN)
Use this method if your client device has a WPS PIN number.
• Initiate the WPS PIN procedure on the client device per the manufacturer’s
instructions.
• Navigate to the Security page of the Wi-Fi section of the CPEi885 GUI as detailed
above.
• Make sure the “PIN” option is selected in the WPS Method dialog box in the Wi-Fi
Security Screen.
• Enter the PIN number of the client device in the field on this screen.
• Click “Apply” on the CPEi885 GUI screen. This must be completed within 2
minutes of starting the procedure on the client device.
• The connection will be automatically established.
3-17
Basic Configuration 3
To Next Page
Loading...
