4-4
DEC 2010
4 Advanced Configuration
Be sure to click the Apply button once you have made changes.
Lease Status Tab
The Lease Status tab in the Local Address menu displays the active DHCP leases since
the last reboot. The Lease Status Tab contains the following selections:
Be sure to click the Apply button once you have made changes.
Lease Reservation Tab
This tab allows you to manage the lease reservation so that the same client receives
the same IP address each time. The Lease Reservation Tab contains the following
selections:
DHCP Ending IP Address Sets the final IP address assigned by the
DHCP server. If the DHCP server runs out
of DHCP addresses, users cannot access
network resources. If this happens,
increase the Ending IP or reduce the
Lease Time.
krowten a taht ,sdnoces ni ,emit eht steSemiT esaeL PCHD
computer remains connected to the
gateway using its current assigned IP
address. At the end of this time, the DHCP
server renews the lease or assigns the
computer a new IP address. The default is
3600 seconds (one hour). The maximum is
999999 seconds (about 278 hours).
Table 4-3 DHCP Server Tab
Field or Button Description
Table 4-4 Lease Status Tab
Field or Button Description
eht syalpsiDemaN tsoH tneilC client host name. The Name
field is limited to 20 characters (only 5
appear in display).
.sserdda )CAM( lortnoC sseccA aideMsserddA CAM
PI eht swohSsserddA P
I Address for each active
lease.
Remaining Lease Duration Shows the amount of time, in seconds,
remaining in the lease.
To Next Page
Loading...
Need help?
General
