4 Insert the radio or battery into the charging pocket
with the front of the radio or battery facing the LED of
the MUC.
The charger LED flashes a few times to indicate the
current battery charge when the radio is inserted in
the tray rails. The light on the charger is red to
indicate that the battery is charging and turns green
indicates that the battery is fully charged.
LED Indicator of Chargers
The following table explains the LED Indicator shown on
the chargers during that status.
Table 7: Indicators
Status LED Indicator Comments
Power On
Green for approx-
imately one sec-
ond
-
Charging Steady red -
Status LED Indicator Comments
Charged Steady green -
Error
2
Fast-blinking red -
Standby
3
Slowly blinking
amber
-
Battery Level
Status
Blink red one time Battery low
Blink amber two
times
Battery medium
Blink green three
times
Battery high
If there is no LED Indication:
• Check if the radio with battery, or the battery alone, is
inserted correctly.
• Ensure the power supply cable is securely plugged into
the charger socket using an appropriate AC outlet and
there is power to the outlet.
2
Normally, re-positioning the battery pack will correct this issue.
3
Battery temperature is too warm or too cold or wrong power voltage is used.
English
22
To Next Page
Loading...
