Motorola DTR600 - Enabling All Tones; Enabling Vibrate; Enabling Keypad Tone; Enabling Power up Tone

Enabling All Tones
1 To scroll through a list of menu items, press the
Menu/OK button.
2 To select the All Tones, locate the Settings →
Tones/Alerts → All Tones.
3 To select, press the Menu/OK Button.
A tick indicates All Tones is enabled.
Enabling Vibrate
1 To scroll through a list of menu items, press the
Menu/OK button.
2 To enable Vibrate, locate the Settings → Vibrate.
3 To select, press the Menu/OK Button.
A tick indicates Vibrate is enabled.
Enabling Keypad Tone
1 To scroll through a list of menu items, press the
Menu/OK button.
2 To select the Keypad Tone, locate the Settings →
Tones/Alerts → Keypad Tone.
3 To select, press the Menu/OK Button.
A tick indicates Keypad Tone is enabled.
Enabling Power Up Tone
1 To scroll through a list of menu items, press the
Menu/OK button.
2 To select the Power Up Tone, locate the Settings →
Tones/Alerts → Power Up.
3 To select, press the Menu/OK Button.
A tick indicates Power Up Tone is enabled.
English
40