NOTICE:
If you receive a busy tone and your radio
display shows Call Failed, the channel is
either not available, busy, or there are no
users reachable within transmission range.
3 Release the PTT button to listen.
Group Call
A group call is a call to or from a group of users.
There are three types of Group Call:
• Profile ID Group
• Public Group
• Private Group
To receive or make calls to a group, configure your radio as
part of the group. When the caller group ID matches the
configured group ID in your radio, you successfully receive
a group call. When the group IDs do not match, your radio
ignores the group call request.
Making Group Call
1 To call a group, press P2 → Contact Alias/Contact
ID → PTT.
The display shows the call icon, call type, and the
contact alias or contact ID.
2 Wait for the Talk Permit Tone to end and speak into
the microphone.
NOTICE:
If you receive a busy tone and your radio
display shows Call Failed, the channel is
either not available, busy, or there are no
users reachable within transmission range.
3 Release the PTT button to listen.
Call All Available
This feature is useful for users with more than one or two
channels.
Call All Available feature allows the ability to communicate
a message to all available radio users at once in a
temporary “super channel group”, without having to change
English
30
To Next Page
Loading...
