Advanced Setting
The Advanced Configuration Mode allows you to configure
special settings in your radio without the need of
programming cables or additional software.
Power Save Mode
This feature is designed to conserve radio power
consumption and it automatically enables when low battery
state occurs.
Power Save Mode can be configured in Customer
Programming Software (CPS) and radio menu. It overrides
the setting of backlight, vibrate and battery saver by
disabling backlight, vibrate and turn on Battery Saveron the
radio.
Enabling Power Save Mode
1 To scroll through a list of menu items, press the
Menu/OK button.
2 To enable the Power Save Mode, locate the
Advanced → PowerSave.
3 To select, press the Menu/OK button.
A tick indicates Power Save Mode is enabled.
Setting the Non-Interference or
Privacy Feature
This feature ensures improved private communications by
configuring an appropriate PROFILE ID number.
IMPORTANT:
By default, the PROFILE ID number is “0000”.
Ensure that all your radios are configured with the
same PROFILE ID number and is easy to
remember.
1 Press Menu/OK → Advanced → PROFILE ID.
2 Enter a four-digit radio PROFILE ID number.
English
36
To Next Page
Loading...
