Answer: Yes. While waiting in queue to talk privately,
you will receive a call reminder tone after 1 minute of
being in queue, followed by another reminder tone 4
minutes after that. No other reminder is heard
afterwards, but you remain in queue until Private
Reply mode is exited.
• Question: How do I respond to group conversation if
I have already pushed the Programmable Button
(for either Private Reply or Direct Call) ?
Answer: Long Press the Programmable button to
exit the private queue mode and press the PTT
button to reply to the group call.
10 Question: What happens if I am in queue to talk
privately, then the person that was transmitting finished
talking and I press the PTT button to talk?
Answer: The radio lets you know you are ready for a
private communication by playing a distinctive Talk
Permit Tone. This prompts from the radio need to
happen to ensure there is a private communication
established. If you do not have this prompt, it means
that you do not have private communication established
and you need to try again.
11 Question: How do I know when the radio is no longer in
Private Mode conversation?
Answer: You are no longer in a private conversation if
the radio sounds an end tone.
NOTICE:
Remember that the Private Reply and the Direct
Call time out after 10 seconds of inactivity in
which both users are sent back to the group call
mode.
Private Call
A private call is a call from an individual radio to another
individual radio.
When you receive a private call, your radio display shows
the call icon, call type, and the contact alias or contact ID.
Making Private Calls
1 To call a private contact, press P2 → Contact Alias/
Contact ID → PTT.
The display shows the call icon, call type, and the
contact alias or contact ID.
2 Wait for the Talk Permit Tone to end and speak into
the microphone.
English
29
To Next Page
Loading...
