Getting Started 1 - 5
Using the Four Slot Cradle
To charge the mobile computer’s battery using the Four Slot USB or Ethernet Cradle:
1. Connect the cradle to a power source. Refer to the MC50 Integrator Guide for more information on setting
up the Four Slot Cradle.
2. Insert the mobile computer(s) into the cradle to begin charging.
Figure 1-4
Inserting the Mobile Computer(s) into the Four Slot Cradle
Table 1-2
Mobile Computer LED Indicators
LED Indication
LED 1
Solid Amber Charging main battery.
Flashing Amber Error in charging; check cable connections.
Solid Green Main battery in mobile computer is fully charged.
Table 1-3
Single Slot Cradle Spare Battery Charging LED Indicators
LED Indication
Off No spare battery in slot; spare battery not placed correctly or cradle
is not powered.
Solid Amber Spare battery is charging.
Flashing Amber Error in charging; check placement of spare battery.
Solid Green Spare battery is fully charged.
To Next Page
Loading...
