3 - 10 MC50 with Windows Mobile 5.0 User Guide
To remove the MSR open the arms and pull the MSR from the mobile computer.
Using the MSR
The MSR sample application illustrates how an application should handle MSR inputs (refer to the Symbol
Applications User’s Guide).
To use the MSR:
1. Attach the MSR to the mobile computer.
2. Power on the mobile computer.
3. Tap Start > Programs > Samples icon > MSR icon to start the sample application.
4. Swipe the magnetic stripe card through the MSR, with the magnetic stripe on the card facing down. Swipe
the card in either direction, from left to right or from right to left. For best results, gently press down on the
card while swiping to ensure contact with the bottom of the reader.
Figure 3-9
Magnetic Stripe Card Swiping
Cable Adapter Module
This section describes how to and use the snap-on CAM with the mobile computer. The CAM snaps on to the
bottom of the mobile computer and can be easily removed when not in use.
Figure 3-10
Cable Adapter Module
Power Port
Communications Port
To Next Page
Loading...
