2 - 22 MC50 with Windows Mobile 5.0 User Guide
Receiving Information
To receive information, align the mobile computer’s IR ports so that they are unobstructed and within close
range. When information is sent from the other mobile computer, the mobile computer (if configured) receives
it automatically.
1. In order to receive information automatically, tap Start > Settings > Connection tab > Beam icon. The Beam
window appears.
Figure 2-23
Beam Window
2. Select the Receive all incoming beams check box to receive beams. By default the mobile computer detects
incoming infrared (IR) beams and prompts you to accept them.
Figure 2-24
Receiving Beam Data Acknowledgement
3. To disable detection of beams, deselect the Receive all incoming beams check box.
NOTE If an older mobile computer attempts to send an IR beam, the receiving mobile computer may not be
prompted to accept it. In this case, before the beam is sent from the older mobile computer, tap Receive
an infrared beam at the bottom of the Beam window.
To Next Page
Loading...
