Preparing Your Pager for Use
English
6
Preparing the Battery Pack
The pager is powered by a battery pack.
The following types of battery packs are
compatible, depending on the model
purchased.
• Lithium-ion battery pack (intrinsically safe
UL model)
• Lithium-ion battery pack (non-intrinsically
safe model)
• Alkaline battery tray (for use with non-
intrinsically safe models only, uses three
1.5 V AAA alkaline batteries)
Preparing the Alkaline Battery Tray
This step is optional for non-UL models.
You will need to insert three 1.5 V AAA
alkaline batteries in the alkaline battery tray
before attaching to the pager.
Use ONLY 1.5 V AAA alkaline
batteries in the alkaline battery tray.
For use ONLY with Non-UL
pagers, i.e. model numbers ending
with “2AN”.
1 Place your finger at the notch, located
on the side of the alkaline battery tray.
6800969001_EN.book Page 6 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
