Preparing Your Pager for Use
English
4
Preparing Your Pager for
Use
Assemble your pager by following these
steps:
Inspecting the Package Contents . . . page 4
Attaching the Belt Clip . . . . . . . . . . . . page 5
Preparing the Battery Pack . . . . . . . . page 6
Attaching the Battery Pack . . . . . . . . page 8
Powering Up the Pager . . . . . . . . . . page 10
Adjusting the Volume. . . . . . . . . . . . page 10
Inspecting the Package
Contents
Before you start using the device, verify the
model number information located on the
label on the back of the pager. Inspect the
content of your package thoroughly. If any
part of the package, the device, or the
included accessories have been damaged
in transit, report the extent of the damage to
the transportation company immediately.
6800969001_EN.book Page 4 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
