Stored Voice Features and Controls
English
30
Stored Voice Features and
Controls
The pager can store at least 8 minutes of
voice messages. Messages are stored
according to their length. If preferred, the
pager can be programmed to store
messages in fixed lengths of 30, 60, or 120
seconds instead. Minitor VI provides a list of
controls for stored message management
— fast forward, rewind, skip to next, return
to previous, lock, unlock, and delete all.
Stored Voice Operation
The message is stored only when a properly
encoded message is received.
Note: Other communications monitored on
the channel that do not alert your pager are
not stored.
The message recording cycle is complete
under any of the following conditions:
• When the Stored Voice Duration for the
message is reached.
• When the squelch circuit no longer
detects carrier signal and no Reset
Function timer is active.
• When the Delayed Reset cycle is
complete and carrier is no longer
detected.
• When the Timed-out Reset cycle is
complete.
6800969001_EN.book Page 30 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
