Pager Programming Software (PPS)
29
English
• Muted Delayed Revert: Waits
momentarily before checking for carrier
drop and then reverts to Monitor mode.
During the momentary wait period mutes
the speaker and stored voice recording
during carrier drop.
• Time-out: Resets the pager after a
preprogrammed amount of time.
• Manual: Audio remains turned on until
the Reset button is pressed while in
Selective Call and Silent Scan modes.
Audible and Vibrate Alerts
For each call address, determines which
alert tone to play and which pattern to
vibrate upon receipt of a page.
For each channel, the pager can support up
to 15 call addresses (10 individual and 5
group). Each call address can be
programmed to alert with different tone and
vibrate patterns.
• Tone Alert: Select from 10 pre-
programmed tones and up to 5 custom
audio alerts.
• Vibrate Alert: Select either a continuous
or pulsed vibrate pattern.
Note: Whether the pager provides an
audible, vibrate, or combined audible/vibrate
alert depends upon the Alert Type Function
Switch option setting.
6800969001_EN.book Page 29 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
