Pager Programming Software (PPS)
23
English
Always On
This feature allows you to keep the pager on
regardless of the On/Off/Volume Control
Knob position.
There are two options available:
• On: The pager will remain powered up —
even when the On/Off/Volume Control
Knob is switched to off position
• Off: The pager turns off when the On/Off/
Volume Control Knob is switched to off
position.
Note: While Always On is enabled, the
pager needs to be power cycled after you
reattach the battery.
Function Switch Options
There are eight different Function Switch
positions available, labeled from A to H. The
following options can be programmed for
each of the Function Switch positions.
Mode
This option allows you to select the mode of
operation for different Function Switch
positions.
There are six different modes available.
• Selective Call:
• This mode allows you to detect two-
tone and long-tone pages.
• Only one frequency can be monitored
for paging tones at any given time.
When a page is detected, the pager
6800969001_EN.book Page 23 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
