Pager Programming Software (PPS)
English
20
Fixed Volume Page Alert
This feature allows you to fix the page alert
volume level at its loudest setting.
There are two options available.
• On: The page alert volume level is fixed
at the maximum. Turning the On/Off/
Volume Control Knob changes only the
voice message volume level.
• Off: Turning the On/Off/Volume Control
Knob changes the voice message and
the page alert volume level.
Priority Scan Time
This feature allows you to set a duration for
the pager to wait before scanning the priority
channels.
Note: This option is enabled only when one
of the Function Switch positions is
configured for priority scan.
The range of the Priority Scan Time is 0.64
seconds to 2.04 seconds; the default is
0.512 seconds.
Note: If the priority scan time is set to more
than 0.512 seconds, you may miss an
incoming message.
6800969001_EN.book Page 20 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
