Preparing Your Pager for Use
English
8
Attaching the Battery Pack
For best performance, the lithium-ion battery
pack should be fully charged before it is
used.
IMPORTANT: To avoid damage and comply
with warranty terms, charge the battery pack
using a Motorola charger as described in the
Amplifier Charger RLN6506 User Guide
(Motorola Publication Number
68012010008) and Standard Charger
RLN6505 User Guide (Motorola Publication
Number 68012010009).
Follow the procedures described next to
attach the battery pack.
1 Press and hold the belt clip down.
2 Align the battery pack at the back of the
pager.
3 Slide the battery pack upwards to the
maximum and slide the latch to the
locked position.
Note: If the battery pack is not installed
properly, the pager will not power up.
4 Replace the alkaline battery tray cover.
6800969001_EN.book Page 8 Monday, January 13, 2014 11:40 AM
To Next Page
Loading...
