Motorola Moto E13 - Connect to Vpns; Add a Private DNS Service

1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Touch Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
To stop the connection, touch the notification and turn off USB tethering, then disconnect your phone and
computer.
Bluetooth tethering
To connect a device to the internet using your phone's cellular data and a Bluetooth connection:
1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Turn on Bluetooth on your phone and pair with the other device.
3. Set up the other device to get its network connection via Bluetooth.
4. On your phone, go to Settings.
5. Touch Network & internet > Hotspot & tethering.
6. Turn on Bluetooth tethering to start the connection.
To stop the connection, turn off Bluetooth or touch & hold in quick settings and disconnect the device.
Connect to VPNs
A virtual private network (VPN) lets you access files on a secure network like an office network with a
firewall. Contact your network administrator for VPN settings and any additional apps or requirements.
To set up a VPN connection:
1. Go to Settings > Network & internet.
2. Touch VPN. If prompted, set a screen lock PIN or password.
3.
Touch .
4. Choose the type of VPN and enter settings from the network administrator.
5. To always remain connected to the VPN, check Always-on VPN.
6. Touch Save.
The network is stored in the VPN list so you can select it when you need to connect.
Add a Private DNS service
Private DNS protects you when you browse the internet and use apps on your phone. It:
Settings : Network and internet
112