3. Select a number.
Control who can connect
You can limit who can connect to your hotspot with its password or QR code:
To switch modes:
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot > Advanced and turn White List Mode on or off.
To add a device to your whitelist:
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Add devices:
•
If the device is already connected, touch it and touch ADD WHITELIST.
•
Otherwise, touch + Manually Add WhiteList Device, type a name and the device's MAC address,
then touch ADD WHITELIST.
The added device will appear in your list.
To remove a device from the list, touch it, then touch Remove.
Block a connected device
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch the connected device, then touch BLOCK.
The device is disconnected from the hotspot and will not be able to reconnect.
Disconnect everyone
To disconnect all devices and prevent them from reconnecting:
1. Turn the hotspot off.
2. Change the password.
3. Turn the hotspot back on to continue using it.
Hotspot: View or change password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Touch Wi-Fi hotspot.
3. Touch Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
Settings : Network and internet
111
To Next Page
Loading...
