multiple talkgroup linked networks. Use this feature to select a network that is most preferred. The
selected network is the first priority for scanning and registration.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→TG Net Sel→Prefer TG Net.
3 Select the required network from the list.
4.18.3.4
Using Any TG Net Registration
When and where to use:Your radio has lost its network coverage and wants to increase the number
of networks it can scan and register. If the talkgroup selected is an Any Net talkgroup, this menu
displays all networks allowed for scanning and registration. If the talkgroup selected is an ISI talkgroup,
this menu displays all talkgroup linked networks allowed for scanning and registration.
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks→TG Net Sel→Any TG Net.
Your radio selects and registers to the network automatically from the predefined list.
4.19
Location
NOTE: This is a Software Selling Feature.
This sub-menu allows you to enable the GPS, change GPS accuracy, and view your position and
testpage.
See Global Positioning System (GPS) Location Service on page 147.
4.19.1
Enabling GPS
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Interface.
3 Select On.
NOTE: Your service provider can enable this feature.
4.19.2
Viewing Your Position
Procedure:
1 From the home screen, press the Menu key.
2 Select Location→Position.
MN005826A01-AE
Chapter 4 : Main Menu
135
To Next Page
Loading...
