• Talkgroup ID/Index
• User defined Index
NOTE: It is also known as Talkgroup Speed Dial.
5.16.1
Viewing the Talkgroup Speed Number
Procedure:
1 From the home screen, press Options.
2 Select one of the following options:
• TG by Folder then select the folder and highlight the required talkgroup.
• TG by abc enter up to 15 characters to narrow the talkgroup names and highlight the
required talkgroup.
3 Press Menu→View.
Example:Radio displays SpeedNum1*, which means that this talkgroup speed number is 1.
5.16.2
Selecting Talkgroups by Index
Procedure:
1 From the home screen, enter talkgroup speed number and *.
2 Press Attach.
NOTICE: To start a group call, press the PTT button.
5.17
Terminal Permanent Disable
NOTE: This is a Software Selling Feature.
Your radio is provided with a feature that allows your service provider to disable it permanently in
case it is stolen or lost. When your radio is disabled permanently, it becomes inoperable and all data
stored on the microSD card or in the internal radio memory is removed. After a Permanent Disable
your service provider cannot enable your radio. It is recommended to Permanent Disable your radio
only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can be
reactivated by returning it to Motorola Solutions.
5.18
Terminal Temporary Disable or Enable
Your radio is provided with a feature that allows your service provider to disable it temporarily in case
it is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is
turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled,
you may resume normal operation.
MN005826A01-AE
Chapter 5 : Features
155
To Next Page
Loading...
