5.19
Wireless Application Protocol (WAP)
NOTE: This is a Software Selling Feature.
Wireless Application Protocol (WAP) is a standard for application layer network communications in
a wireless communication environment such as TETRA network. The protocol is used to access the
mobile web from a radio through a WAP browser.
5.19.1
WAP Browser
The Openwave Mobile Browser is a Wireless Application Protocol (WAP)-compliant user agent. The
WAP browser, available only in TMO mode and on a network with Packet Data enabled, provides all
the basic services of a computer web browser. Depending on the CPS configuration, the display can
return to the browser session automatically after an interruption by the preemptive display. The WAP
browser does not support right-to-left languages (as Arabic and Hebrew); English is used instead. The
characters of right-to-left scripts are not displayed.
NOTE: Depending on the radio configuration and the network conditions, the WAP browser
may not display images properly (or may display them with a delay).
5.19.2
Entering the Browser
Prerequisites: From the home screen, press the Menu key. Set Setup→Data Setup to Data Only or
Voice & Data.
Procedure:
1 From the home screen, press the Menu key.
2 Select Browser.
3 Optional: Exit the browser by pressing and holding the END key.
5.19.3
Entering Browser Menu Panes
Prerequisites:You are in the browser.
Procedure:
1 Press Menu or Menu key.
2 Usually, it brings up the Navigate pane, or the last browser menu pane.
NOTE: If the web page you navigated to has two or more soft keys/options, the Options
pane pops up. From here, you may scroll to other panes with the Left or Right
navigation keys Or you may select Browser Menu and then scroll to the required pane.
5.19.4
Tips for Browsing
Create and use the following steps for easy browsing.
MN005826A01-AE
Chapter 5 : Features
156
To Next Page
Loading...
