Option Actions
Making simplex calls in TMO or DMO
a Press and hold the PTT button.
b Wait for the Talk Permit tone before talk-
ing.
c Release the PTT button to listen.
Making duplex calls in TMO
a Press the Send key.
b You hear a ringing tone until the called
party answers the call.
6 To end the call, press the End key.
5.9.2
Phone and PABX Calls
Phone Calls allow you to call a landline telephone number or a cellular mobile phone number. Private
Automatic Branch Exchange (PABX) Calls allow you to call local (office) extension numbers.
NOTE: This feature is available only in Trunked Mode Operation (TMO).
The Phone/PABX Speed Dial feature allows you to dial a shortened number of up to three digits
instead of the full number. The Phone/PABX Speed # number is assigned when the dialed number is
added in the contact list.
5.9.2.1
Making Phone or PABX Calls
When and where to use:
This feature is only available in Trunked Mode Operation (TMO).
Procedure:
1 From the home screen, enter the number.
2 If Phone or PABX is not the first type of call presented, press Ctype repeatedly to select it.
3 Press the Send key.
4 To end the call, press the End key.
5.9.2.2
Using the Phone/PABX Speed Dial
Procedure:
1 From the home screen, enter the predefined Phone/PABX speed dial number and # key.
2 Press Send key.
5.9.3
Receiving Individual Calls
Procedure:
1 Use one of the following methods to answer a private, phone, or Private Automatic Branch
Exchange (PABX) call.
MN005826A01-AE
Chapter 5 : Features
151
To Next Page
Loading...
