18
English
SCAN
SCAN
You can monitor several channels in order to receive
any call that is transmitted on any of these channels.
Sixteen different channels can be programmed into
each scan list by the dealer.
Once the radioÕs scan operation is activated and the
radio detects a call coming through a channel in its
scan list, it switches to that channel for you to
receive the call.
STARTING OR STOPPING A SCAN
OPERATION
The E symbol, and the channel you are
transmitting on, will appear on the LCD screen when
you start a scan operation.
The LED indicator blinks green during a scan
operation.
NOTE: If you enter Menu Mode while the radio is
scanning, scanning will stop. It will resume when
you exit Menu Mode.
To start or stop a scan operation:
ÑorÑ
NOTE: The LED indicator will blink (green) during a
scan operation.
1. Press the Scan button (only available if
programmed by your dealer) to start a scan
operation. You will hear a positive indicator
tone.
2. Press the preprogrammed Scan button again
to stop the scan operation. You will hear a
negative indicator tone.
1.
) to enter Menu Mode.
2.
< or > until
3.
) to select
4.
< or > until
(to start a scan operation),
or until
(to stop a scan operation).
5.
) to select the desired option.
SCAN
SCAN
ON
OFF
To Next Page
Loading...
Need help?
General
