85
advanced features
MOTOtalk and Talkgroup knob
use
See “group calls, talkgroups, sets, and hubs”
on page 21.
enter MOTOtalk via main menu
1
From the main menu, scroll to MOTOtalk
and press
-
under
Select
.
2
Select
Go to MOTOtalk
.
Switching to MOTOtalk Please Wait
displays.
After a few seconds, the MOTOtalk idle
screen appears.
MT Ready
appears on the first
line of the display. The code you are set to
appears on the second line of the display. The
channel you are set to appears on the third
line of the display.
Note:
When switching from the network to
MOTOtalk, the last channel and code that
were set appear on the MOTOtalk idle
screen.
While in MOTOtalk, this icon TBD appears on
the display, indicating that there is no network
signal and MOTOtalk is active.
exit MOTOtalk
1
From the MOTOtalk idle screen, press
.
2
Scroll to
MT Options
and press .
3
Select
Exit MOTOtalk
.
Switching to Network Please Wait
displays. After a
few seconds, the network idle screen
appears.
set a channel
1
From the MOTOtalk idle screen, press
-
under
Edit
.
2
Scroll to
Channel
.
r765_Armadillo.book Page 85 Wednesday, August 27, 2008 7:01 PM
To Next Page
Loading...
Need help?
General
