Motorola r765IS

86
advanced features
3 Press - under Edit .
4 Select a channel.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
set a code
1 From the MOTOtalk idle screen, press -
under Edit.
2 Scroll to Code .
3 Press - under Edit .
4 Select a code.
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
make and receive a code call in
MOTOtalk
1 Press and hold the PTT button. MT Transmit
appears on the first line of display. Begin
speaking after your handset emits the
MOTOtalk tone.
2 Release the PTT button to listen.
The tone emitted from your handset when
using MOTOtalk is 4 beeps and sounds
different from the standard tone heard with
on-network Private and group calls.
If you receive an error message:
• There may be no parties on your channel or
code.
• You are out of range.
When you receive a code call using
MOTOtalk,
MT Receive appears on the first line
of the display.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing .
r765_Armadillo.book Page 86 Wednesday, August 27, 2008 7:01 PM