Motorola r765IS

87
advanced features
set to Receive All
You can set your handset to receive
MOTOtalk transmissions from any handset
that is set to the same channel, regardless of
the code (1-15), by setting the code to
Receive
All
. When you receive transmissions with the
code set to
Receive All , the display changes
from
Receive All to the code on which the
transmission was received.
Tip: You can reply to an incoming call within 6
seconds after hearing the short ending beep
by pressing the PTT button.
Note: You cannot initiate a code call when the
code is set to
Receive All . If you press the PTT
button with the code set to
Receive All , you will
receive an error message.
To set the code to
Receive All :
1 From the MOTOtalk idle screen, press -
under
Edit .
2 Scroll to Code .
3 Press - under Edit .
4 Select Receive All .
5 When you are finished, press - under
Back to return to the MOTOtalk idle screen.
private MOTOtalk calls
You can have a private conversation with
another person using MOTOtalk. When on a
Private MOTOtalk call, no other parties can
hear your conversation. In order to make a
Private MOTOtalk Call, you must use the valid
10-digit Personal Telephone Number (PTN) of
the person you are calling. The person you are
calling must be in MOTOtalk and set to the
same channel to receive your call.
If you receive an error message:
• You may not be using a valid PTN.
r765_Armadillo.book Page 87 Wednesday, August 27, 2008 7:01 PM